Snapshot Sniper DIY Game Trail Deer Hunting Camera Components To Build Your Own Deer And Security Cameras

Snapshot Sniper DIY Game Trail Deer Hunting Camera Components To Build Your Own Deer And Security Cameras

"See what you've been missing!"

Home

Products

Instructions/tech info

Pictures

Contact

Links

PLEASE NOTE: Camera types are listed here. If you are ordering a SSII, Bigfoot board or the LCD board with Field Marshal(time lapse), please look at what type of camera you are using so you will know what "type number" to select on your order. The LCD board standard program will run all of the cameras listed.

Camera Types:
Type 1: Sony P41/W1/W5/W7/W290 - VERY IMPORTANT: Use Type 1 for the Sony P41 only if you are using standard Memory Stick Pro. If you are using Memory Stick Duo with Adapter then you need to use Type 2 for the Sony P41.

Type 2: Sony P32/P52/P100/P150/P200/W35/W55,Pentax E50/E90,Nikon L10/L11/L14

Type 3: Sony S40/S600/W200/W220/W230, Samsung A503, Fuji J10

Type 4: (ON/OFF) - Olympus D370/380, Panasonic

Type 5: (ALWAYS ON) - Olympus D370/380

Type 6: Sony A700/A500, Minolta D7, Nikon and Canon SLR Cameras

#1 - Select the control board

SSII Board

SSII Controller Board
Board comes with stand-offs and HPWA Lens NOTE: Battery not included. Very simple to opertate, and PICAXE COMPATABLE!, To see how to program your own
Click here: Board Info
Click here: Programming Info
Click here for:
Free Sample Programs

Black/white lens - OUT OF STOCK
Black/black lens - IN STOCK
Camo/white lens - IN STOCK
Camo/black lens - OUT OF STOCK

Battery for SSII Controller Board Only
This power packed 1/2AA 3.6V 950mAH battery will run your SSII for a long time. We estimate over 2 years with typical use.

IN STOCK
$5.00

LCD Board

Sensor on BACK board shown, See Sensor on FRONT here.

NEW " Field Marshal" feature. Combines time lapse and motion sensing!
Snapshot Sniper Controller Board With LCD
Board comes with 9V battery holder and external "motion kill" switch with weather proof rubber boot. PACKED WITH FEATURES!
To see them
Click here: Board Info
Sensor on BACK board shown, See Sensor on FRONT here.

Note: If you want the "Field Marshal" time lapse feature combined with motion sensing, then select the camera type that it is for. If you want the advanced settings where the one board will work with all camera types, then select multi cam control (no "Field Marshal" feature).

IN STOCK

2"x6" Plastic Control Panel (For Snapshot Sniper Controller Board With LCD) can be cut to fit your enclosure.

OUT OF STOCK
$8.00

Bigfoot Board

Bigfoot Controller Board
For more information
click here: Bigfoot Board Info

IN STOCK

Bigfoot Sister Board
Small Size Only 1/2" by 1 1/4"
Designed to connect to Programmed Bigfoot Board when using an Ir Array, Sound Amp, Light or Slave Flash. One Sister Board for each accessory added to your build.

IN STOCK
$5.00

HPWA/Bigfoot Easy Alignment Mount
For use with the High Performance Wide Angle Fresnel Lens(HPWA). Comes with 3/8 standoffs and Screws.

IN STOCK.
$4.00

#2 - Select the motion sensor lens (Fresnel Lens) for the control board (Already comes with the SSII)

0.9 Focal length High Performance Wide Angle Fresnel Lens (HPWA)
FOR SENSOR ON BACK BOARD
Intall SPECS
NOTE: If you want to use the day/night feature of the SS LCD Board, then you must use a white lens.

Black/white lens - OUT OF STOCK
Black/black lens - IN STOCK

Camo/white lens - OUT OF STOCK

Camo/black lens - IN STOCK

0.9 Focal length Wide Angle Fresnel Lens

OUT OF STOCK
$3.00

0.65 Focal length Narrow Detection Zone, Long Range Fresnel Lens

OUT OF STOCK
$3.00

#3 - Select the type of connection between the control board and the camera.

$1.50

Servo Connector
30 gauge camera side
26 gauge controller side

IN STOCK

Servo Connector For Adding External Power
2 of the wires will be 28 gauge Camera side for the external power and the rest will be 30 gauge.
26 gauge controller side

IN STOCK

Stereo Jack, 3' stereo cable with plug and ribbon cable pre soldered to jack. (For modifying Sony P41 cameras).
How to modify the: Sony DSC-P41

IN STOCK
$12.00

SLR CABLE - 2.5mm 3 conductor stereo plug with 3 foot cable. (For use witrh SLR cameras that have a shutter release port).

IN STOCK
$5.00

#4 - Select the waterproof case

Camo cases and black cases

IN STOCK

Oversized Neoprene Sponge Rubber Rope Replacement Seals
Use for replacing the original seal for Pelican Cases and Wal-Mart Cases
Also sold in bulk...10 ft minimum please

IN STOCK

#5 - Select the proper stand-offs and screws for the lens, case and control board that you'll be using (these already come with the SSII)

1 set of Stand-offs and mounting screws.
It is very important that you select the correct stand-offs. These set the focal length of the Fresnel lens (lens for motion sensor). The wrong stand-off length can cause falsse triggers, or poor sensitivity.

IN STOCK

#6 - Select the lenses for in front of the camera


	1-1/4 (1.24") Round Glass 1mm thin	IN STOCK $2.50
	1-1/4 (1.24") Round AR(Anti Reflective) Glass 1mm thin	IN STOCK $5.00
	"Flash Extender" Lens This will extend the flassh distance 5-10 feet. Can create a "spotlight effect" where the edges are darker that the center of the picture. If you prefer higher quality pictures, then use glass, if you don't mind the darker corners and want a little more flash distance, go with this lense in front of your camera flash.	IN STOCK $3.00

#7 - Select option to secure the unit

Stainless Security Tube
These tubes accept the 5/16" Python Cable Lock. To install the tube, drill a 3/8" hole and tap it in, then seal with GOOP.

IN STOCK
$4.95

Pelican Case Locking Bracket
IMPORTANT: You'll need the Python Cable Lock to go with this bracket if you don't already have one.

For 1010 Case IN STOCK
For 1020 Case OUT OF STOCK .
For 1040 Case IN STOCK.

1 Pair of Black-Oxide Steel U-Bolts (Should be painted to prevent rusting).
U-Bolt SPECS

IN STOCK
$3.00

#8 - Select foam for in front of and behind camera (be sure to not get too thick so that the lid will close good. Too thick can cause the case seal to fail).

Eva Foam WITH adhesive backing

IN STOCK

Eva Foam with NO adhesive backing

IN STOCK

Camera Flash Gaskets
To be used for flash seals and many other camera building uses also. 4 by 2 1/2 - flash and shutter holes are not cut, you cut those yourself

IN STOCK

#9 - Miscellaneous Items

Replacement Lens For SSII
This lens contains the mounting bracket for the SSII, so this is what you need to replace a damaged lens for the SSII board.

Black/white lens - OUT OF STOCK
Black/black lens - IN STOCK
Camo/white lens - IN STOCK
Camo/black lens - OUT OF STOCK

Assorted Battery holders
Choose the battery holder(s) to meets your needs. These are commonly used for adding external batteries to the camera for longer time in the field.

IN STOCK

IR material for cameras converted for infrared setups.
670NM .040 thick allows the brightest pictures while still blocking most of the visible light.

IN STOCK

Mounting Tape
Use this double sided mounting tape for lens mounting. Completely waterproof seal. Replaces messy smelly glues. Is not electrically conductive. Enough to complete several cams.

1.6 inches x 2 feet
IN STOCK
$5.00

Extra picaxe 08M2 chip for custom programs on the Simple Sniper.

IN STOCK

Chip with latest standard or Field Marshal programming for the LCd board.

IN STOCK

Use the buttons to order on line, or send a check or money order to:
Snapshot Sniper LLC
3 Sherwood Park
Duncan, OK 73533